Welcome visitor you can login or create an account.

Online Store Theme Logo


Acrylan Silicon white 3L

Availability: In stock
*If there are any issues with item’s stock, one of our representatives will contact you
€26.41
€27.80

SILICON acrylic product for exterior use, which offers excellent water vapour permeability, low water absorption, long life and at the same time durable and elegant decoration.

Additional Information

Description

GENERAL CHARACTERISTICS
Acrylan SILICON is a SILICON acrylic product for exterior use, which offers excellent water vapour permeability, low water absorption, long life and at the same time durable and elegant decoration. Unlike other products, in addition to excellent resistance to UV-radiation and weathering, enables the moisture that is trapped inside the wall to escape easily in the atmosphere which in combination with the high surface waterproofing prevents problems such as blisters, cracking, peeling and formation of mold on the surface of the building. It can be applied on any new or old surface such as plaster, concrete or surfaces leveled with putty after appropriate preparation. These properties make the ACRYLAN SILICON ideal for areas with high humidity and extreme weather conditions as well as for the restoration of listed buildings, actively contributing to maintaining the longevity of the building.

SURFACE PREPARATION
Surfaces should be clean, dry and smooth, free from dust, grease and loose or flaking paint. Use VITEX's ACRYLIC PUTTY to fill any cracks or holes. New surfaces made of plaster, concrete, cement, stucco, rendering, plasterboard etc. or surfaces previously covered with water-based paints or distempers should first be primed with ACRYLAN UNCO ECO (micronized ecological acrylic SILICON water-based primer) ensuring maximum permeability of water vapour.

COLOURS
It is available in white. The base paint of ACRYLAN SILICON can be used for th preparation of unlimited number of shades through VITEX's COLORFULL Tintin System.

 

 

FEATURES

Packaging : 3L

Drying :  It is touch dry after 30 - 60 minutes .

Recoatability Time :  It can be recoated after 3 - 4 hours, depending on atmospheric conditions.

Spreading Rate : 13 - 15 m2 / L per coat on properly prepared surfaces.

Thinning : Dilute 10% with water

Application : Apply by roller, brush or spray gun.